Tilt Panel Boundary Fencing
Solid Reinforced Concrete 110mm Thick.
.
Best fence for noise control. Thicker than Motorway Noise Barriers.
Strong and durable. Will last the life of the house.
Low maintenance.
Maximum privacy.
Minimum site disruption.
​
Ideal for Side Fences
Ideal for Front Fences and very Cost Effective
The Process
Footing Holes
Footing Complete
Rebar in Panels
Installing at Site
Pouring Concrete
Panels Finished
Loading for Delivery
Install Complete
​Panels & Piers Style
Height is 1.8 and 2m to the top of the panel.
The Piers are a little higher depending on which cap is used. There are 4 styles.
Std Pier spacing is 3 meters centre to centre.
All parts are made from solid reinforced concrete.
The panels are held firmly in the pier so they do not rattle in the wind.
Footings are only at the Piers
Smooth Concrete Finish
Ashlar Slate Pattern
Natural Stacked Stone Pattern
This is What you Get.
Steel reinforced concrete components.
Choice of pier caps.
Quality detailing
High standard of finish.
​
​
​
What you Don't Get.
This Fence is Not One of Ours
Rough Work
Left open to Rust
What!!
Fencewise Quality Solid Concrete Fencing
What's Different About Our Fences And Why it Matters
The Joining Method We Use
We bolt our panels together with marine grade stainless steel bolts. They can never come apart and will retain the structural integrity forever.
We are the only ones that use this method.
​
After install, the bolts are covered over and cannot be seen.
Indistinguishable from the rest of the panel when painted.
​
Because the bolt hole is larger than the bolt, it allows the panels to move laterally as the concrete expands and shrinks, as concrete does.
Thats why there are cuts in your driveway and footpaths.
It's called a control joint and prevents the panels from cracking, letting water in, and thereby starting corrosion of the reinforcing. Concrete Cancer.
The Joining Method We don't Use
​Others use what is known as the "pin and glue" method to join their panels.
A hole is drilled through one panel into the panel to be joined.
A short piece of rebar is then glued in to hold them together.
Unfortunately, this also prevents the panels from moving laterally and will lead to some panels cracking or separating at the joint over time.
Fence shown here is not ours.
This is why we don't use this method
Pricing Gold Coast Urban Area
For our Std. Panels.
These are rectangular 6.1m long and cover 5.8m along ground.
They have overlap joins of 300mm. There is one footing every 5.8m.
Ground must be straight, level, and free of objects
Minimum order is 24m at this price.
​
1.5m ht. $340 per lineal meter incl GST
1.8m ht. $360
2.0m ht $390
​
Special Made Panels over 3m long extra $165 per panel. Under 3m long $330 per panel.
Raked Panels (Sloped/ Angled) Used on slopes that are too steep for Steps are Special Panels.
Raked panels maintain an equal height above the ground along the top.
​
Irregular Shaped Panels are special
Inline Panels
These panels butt together and are flush along one side.
There are 550mm wide joining pieces on the other side at each join. Each std panel covers 6.1m
Cost is $400 per join.
Single Step and Double Step
Ideal for gentle slopes
Raked
When too steep for steps
Recently Completed Jobs
56 Unit Complex for Omnicorp Hope Island
Another for Greyburn Construction Hope Island
For Greyburn Construction Hope Island
Tiles on concrete for stone effect
How to Enquire
Email to enquiries@fencewise.com.au
Send us a brief description of what you are looking for.
If it's a front fence or has special features include a rough drawing and some rough measurements by stepping it out.
A photo or two of the area will be helpful.
Include the height you want and the address so we can have a look on Google.
​